lineart

Started by lenko, February 15, 2010 05:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

lenko

i dunno if you guys have noticed with my recent shit but i've been shying away from lineart recently to focus on composition and colour. as such i'm really out of practice but I've been looking back at old work and I definitely gotta say its the weakest part of my work by far (except the fact that i draw 'the face' over and over and over again).



the only remotely decent lineart i've done is because I had flash's smoothing to back me up and even then it isnt that good

basically i'm doing a piece with a lot of detailed lineart - much like a comic book page would be done - and its driving me fucking bananas. shit always ends up too cluttered or messy, some lines look too small and others look too big or wobbly or gross, etc etc. everything ive been doing ends up looking like something tim burton forgot to draw cos its so messy

i'm using photoshop for this, probably sticking with the regular round brush - but I was wondering what settings you guys used (especially regarding sensitivity and size), any techniques or tips that you'd like to share and just general advice regarding solid/black lineart. hell there might be programs better for the job than PS but i'm 100 percent sure this is down to technique

thanks in advance
<emanhattan> i remember pingu ice cream
<emanhattan> it was a better time
<emanhattan> when the penguins were cold and delicious
<emanhattan> and i knew i was gonna be
<emanhattan> consequence free

rtil

you can always achieve the same look in every raster program if you know what you're doing, but popular alternatives to photoshop are corel painter, sai painter and opencanvas. i can't get sai painter to work (it's completely in japanese but i have an english translated crack, but it won't ever open) but corel painter and OC are more focused on having brushes that emulate real blending. some people prefer them, but honestly once you start using photoshop's brush capabilities there's no reason to use that kind of stuff.

lenko

thanks. ive given sai a shot and lineart is a little more flexible to do than in PS, plus apparently theres a vector option somewhere
<emanhattan> i remember pingu ice cream
<emanhattan> it was a better time
<emanhattan> when the penguins were cold and delicious
<emanhattan> and i knew i was gonna be
<emanhattan> consequence free

The Good Ole Ant

there's always illustrator if that doesn't work
foodeetin 3:35 pm
   u rich prick tho man
   fuckin ceo ass
   give me a raise
   in the future i mean
sAlaDofMetal 3:35 pm
   ill ma fccain dic in yo face
sAlaDofMetal 3:36 pm
   "ill ma fccain dic in yo face" what the fuck
foodeetin 3:36 pm
   lmao
sAlaDofMetal 3:36 pm
   ill ma's fuckin dick in your face
   ew
   a
   a
   a
foodeetin 3:36 pm
   lmfo

rtil

illustrator is a vector program. he's talking about raster programs

shura

#5
if i want smooth lines, i do very quick strokes. If a certain line doesn't come out the way i want it to look, i add more strokes to the line to add thickness and shape, and then i whittle it down with my eraser. it's terribly time consuming and im sure other people have way more effective methods, but i've gotten used to it and now i'm superfast at it.

also, im not sure if you do much trad work, but when i draw on paper i love to use softer pencils (in the high B's). they give a richer darker line and feel very smooth. I'm sure you already know this, but in your tablet properties you can adjust the feel of the tip of the tablet pen as well.

Right now in my tablet settings i have the "tip feel" on the second softest setting. it feels very much like the pencils i use for paper. if you set the tip feel to "firm" you get much finer lines, and you have to press very hard to get a thick line, which i dont like B(

also i think that having the "tip feel" on soft really allows you to take advantage of your pen sensitivity to the max. mine is always set to the second softest setting or maybe the middle setting maximum. it really depends on what you're drawing tho. i like to use firm when i draw shit like architecture.

hope it helps !

jjjjjjjjjj

^i just draw with really quick strokes as well i cant think off another way to make smoother lines

Jeinu

i must admit i use the pen tool for those picky smooth lines that i can't get right freehand. however, getting it to look good and match the rest of the lineart is where it can get difficult. if you're going to simulate pressure when stroking the line, you should have the minimum diameter (in the brush settings) at least 30-40%, because otherwise you get that weird thin-THICK-thin line that doesn't seem to match anything.

The Good Ole Ant

#8
i just get custom brushes or draw the shit in flash then import

and lenko, honestly i think your style looks better without lines
just throwing that out there
foodeetin 3:35 pm
   u rich prick tho man
   fuckin ceo ass
   give me a raise
   in the future i mean
sAlaDofMetal 3:35 pm
   ill ma fccain dic in yo face
sAlaDofMetal 3:36 pm
   "ill ma fccain dic in yo face" what the fuck
foodeetin 3:36 pm
   lmao
sAlaDofMetal 3:36 pm
   ill ma's fuckin dick in your face
   ew
   a
   a
   a
foodeetin 3:36 pm
   lmfo

lenko

Quote from: Li just get custom brushes or draw the shit in flash then import

and lenko, honestly i think your style looks better without lines
just throwing that out there

yeah man i hear ya. i think the same too

this assignment pretty much requires heavy lineart though

also thanks a lot for the tips guys im probably gonna try speeding up my lines so i dont go all 'shaky'
<emanhattan> i remember pingu ice cream
<emanhattan> it was a better time
<emanhattan> when the penguins were cold and delicious
<emanhattan> and i knew i was gonna be
<emanhattan> consequence free

Hnilmik

I'm not sure how much this will help you, but a friend of mine recommended these tips for line art in photoshop to me:

Quotewindow>brushes
hit shape dynamics
size jitter = 0
control Pen Pressure
minimum = 1%
everything else off

hit texture
scale =28%
depth=25%
blending mode color burn
great for line art

For coloring, hit other dynamics and either turn off shape dynamics or increase minimum diameter to 50%

in other dynamics, opacity and flow jitter is at 0%, control should be pen pressure

Wet edges (without texture) works well with coloring as well
these are all done with the Hard Round brush sizes 9,7,5,3 whatever your fancy is

I will stand corrected if these specs are wonky though, 'cause I hardly understood what he told me.

lenko

wow i havent even heard of 'colour burn' thankyou very much kim

i'll give these a shot later
<emanhattan> i remember pingu ice cream
<emanhattan> it was a better time
<emanhattan> when the penguins were cold and delicious
<emanhattan> and i knew i was gonna be
<emanhattan> consequence free

lenko

just bumpin to say these settings are fucking great, thanks a lot
<emanhattan> i remember pingu ice cream
<emanhattan> it was a better time
<emanhattan> when the penguins were cold and delicious
<emanhattan> and i knew i was gonna be
<emanhattan> consequence free